This week the Addtronics team got right back to work by continuing testing and holding our regularly scheduled weekly liaison and coach meetings. Since last week we have worked to improve various components to interact better with other parts of the product. The adapter part and new 3D printed interface are both currently being revised based on testing results to better suit the other components. Aside from this, we have also conducted testing using a variety of motors to determine which motor will help us meet our desired lifting goal while still functioning well with the other electrical components. Currently, we are finalizing a decision of the most appropriate motors to then properly map the dimensions needed for the interface (as can be seen in the second picture).

As components are individually replaced and improved, we have also begun setting up for a cohesive weight test using all of the components. We plan to use use the mock box to conduct the weight test and have rebuilt it to accurately model the weight of a transformer pad found in the field. Additionally, the weight of the mock box is easily removeable which will allow for testing of various conditions. Lastly, we have begun preparing for our qualification review board 1 (QRB1) presentation. We have begun sorting through all of our data and compiling it in a way that best conveys the information to our audience. The presentation will include highlights of what we have accomplished so far, the things we are currently working on, as well as our plan moving forward.