{"id":1282,"date":"2024-03-17T15:09:54","date_gmt":"2024-03-17T15:09:54","guid":{"rendered":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/?p=1282"},"modified":"2024-03-17T15:10:23","modified_gmt":"2024-03-17T15:10:23","slug":"time-for-another-drying-test","status":"publish","type":"post","link":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/2024\/03\/17\/time-for-another-drying-test\/","title":{"rendered":"Time for Another Drying Test!"},"content":{"rendered":"\n<p>The DesiGators weeks of hard work have finally paid off! The team now has all of the necessary components needed to begin another (almost) fully integrated drying run. Apple slices were used in this iteration of the testing phase and placed on the completed drying racks atop the load cells. The relative humidity and temperature sensors were attached to the drying chamber and the unit was left to run for 24 hours. The team was able to collect data successfully over the 24 hour time period and dried the fruits completely! The second drying test was a success!<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" src=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-1024x768.jpg\" alt=\"\" class=\"wp-image-1284\" srcset=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-1024x768.jpg 1024w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-300x225.jpg 300w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-768x576.jpg 768w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-1536x1152.jpg 1536w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1-280x210.jpg 280w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1015-1.jpg 1920w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">The drying chamber hooked up with the load cell and air sensors<\/figcaption><\/figure><\/div>\n\n\n<p>The team spent this week assembling all the metal parts needed for the load cell subassembly. These parts have been sent to the FSHN technician to get welded for the final assembly. A model of the final welded assembly is shown below.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"696\" src=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-1024x696.jpg\" alt=\"\" class=\"wp-image-1288\" srcset=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-1024x696.jpg 1024w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-300x204.jpg 300w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-768x522.jpg 768w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-1536x1044.jpg 1536w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030-309x210.jpg 309w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/thumbnail_IMG_1030.jpg 1920w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">The load cell subassembly<\/figcaption><\/figure><\/div>\n\n\n<p>The team also sent over the metal support material so that a test version of the shelving assembly could be welded and placed within the chamber. Once the team verifies that the shelving assembly will fit neatly into the holes in the drying chamber they will be able to produce final versions for all four chambers.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-1024x576.jpg\" alt=\"\" class=\"wp-image-1290\" srcset=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-1024x576.jpg 1024w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-300x169.jpg 300w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-768x432.jpg 768w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-1536x864.jpg 1536w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-2048x1152.jpg 2048w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240305_221436008-min-373x210.jpg 373w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">The team making a test model of the shelves within the drying chamber<\/figcaption><\/figure><\/div>\n\n\n<p>The team did run into a bit of a roadblock this week in regards with the heater ordered from Tutco-Farnam. The team believes that the heater that was delivered did not match what was ordered. The team wanted NPT fittings on both ends of the heater and the heater that was delivered did not have that. The team believes that this is an error on the manufacturer&#8217;s end and hopes to work with Tutco-Farnam to resolve the situation amicably.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-1024x576.jpg\" alt=\"\" class=\"wp-image-1292\" srcset=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-1024x576.jpg 1024w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-300x169.jpg 300w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-768x432.jpg 768w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-1536x864.jpg 1536w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-2048x1152.jpg 2048w, https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-content\/uploads\/sites\/154\/2024\/03\/PXL_20240229_204312709-min-373x210.jpg 373w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">The temporary heat torch the team will be using until the heater conflict is resolved<\/figcaption><\/figure><\/div>","protected":false},"excerpt":{"rendered":"<p>The DesiGators weeks of hard work have finally paid off! The team now has all of the necessary components needed to begin another (almost) fully integrated drying run. Apple slices were used in this iteration of the testing phase and&hellip; <a href=\"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/2024\/03\/17\/time-for-another-drying-test\/\" aria-label=\"Read \\\"Time for Another Drying Test!\\\" class=\"read-more\">Read&nbsp;More<\/a><\/p>\n","protected":false},"author":432,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[12],"tags":[58],"class_list":["post-1282","post","type-post","status-publish","format-standard","hentry","category-springsemester","tag-week-9-spring"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/posts\/1282"}],"collection":[{"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/users\/432"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/comments?post=1282"}],"version-history":[{"count":1,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/posts\/1282\/revisions"}],"predecessor-version":[{"id":1294,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/posts\/1282\/revisions\/1294"}],"wp:attachment":[{"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/media?parent=1282"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/categories?post=1282"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ippd.ufl.edu\/blogs\/ay2324team08\/wp-json\/wp\/v2\/tags?post=1282"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}